LA Configuration

The following sections describe the configuration of LA running as a part of ISS.

Configuration Topology
Configuration Guidelines
Default Configurations
The table shows the default LA configuration.
Enabling Link Aggregation
Refer to the figure below for setup. LA is disabled by default.
Configuring Port-Channel Interfaces
Refer to Link Aggregation Topology figure for setup. Independent mode is disabled by default.
Configuring Port-Channel Interfaces and System and Port Parameters
Refer to Link Aggregation Topology figure for setup. Ports 1, 2 and 3 will be part of link aggregation and will be configured to belong to port-channel 1. Different system and port parameters will be configured.
MTU Configuration
Removing Interface from a Port Channel Group
Displaying LACP Status
To view the port-channel information in a detailed and summarized form along with load balance frame distribution scheme, port, and port-channel information, use the following command.
Dynamic Aggregator Configuration