debug lldp

To specify debug level for LLDP module, use the command debug lldp in Privileged EXEC Mode. The no form of the command disables debug option for LLDP module.

debug lldp

debug lldp { {all } { | all-fail } { | buf } { | critical } { | ctrl } { | data-path } { | init-shut } { | mgmt] } { | pkt-dump } { | redundancy } { | resource }

{ | tlv } { {all } { | chassis-id } { | inventory-management } { | lagg } { | mac-phy } { | max-frame } { | med-capability } { | mgmt-addr } { | mgmt-digest } { | network-policy } { | port-descr } { | port-id } { | port-vlan } { | ppvlan } { | proto-id } { | pwr-mdi } { | sys-capab } { | sys-descr } { | sys-name } { | ttl } { | vid-digest } { | vlan-name} }

no debug lldp

no debug lldp { {all } { | all-fail } { | buf } { | critical } { | ctrl } { | data-path } { | init-shut } { | mgmt] } { | pkt-dump } { | redundancy } { | resource } { | tlv} }

Parameters

Parameter	Type	Description
`all`		Enter to generate debug statements for all kinds of traces.
`all-fail`		Enter to generate debug statements for all kinds of failure traces.
`buf`		Enter to generate buffer allocation / release traces.
`critical`		Enter to generate debug statements for critical SEM.
`ctrl`		Enter to generate debug statements for control plane traces.
`data-path`		Enter to generate debug statements for data path traces. This trace is generated during failure in packet processing.
`init-shut`		Enter to generate debug statements for initiation and shutdown traces. his trace is generated on failed initialization and shutting down of LLDP related entries.
`mgmt`		Enter to generate debug statements for management traces. This trace is generated during failure in configuration of any of the LLDP features.
`pkt-dump`		Enter to generate debug statements for packet dump traces.
`redundancy`		Enter to generate debug statements for the LLDP redundancy module.
`resource`		Enter to generate debug statements for OS resource related traces. This trace is generated during failure in message queues.
`tlv`		Enter to generate debug statements for TLV related traces for the following traces:
`all`		Enter to generate debug statements for all TLV trace messages.
`Chassis-ID`		Enter to generate debug statements for Chassis-ID TLV traces.
`inventory- management`		Enter to generate debug statements for inventory-management TLV traces.
`lagg`		Enter to generate debug statements for Link Aggregation TLV traces.
`mac-phy`		Enter to generate debug statements for MAC or PHY TLV traces.
`max-frame`		Enter to generate debug statements for maximum frame TLV traces.
`med-capability`		Enter to generate debug statements for MED Capability TLV traces.
`mgmt-addr`		Enter to generate debug statements for Management VID TLV traces.
`mgmt-digest`		Enter to generate debug statements for Management VID traces.
`network-policy`		Enter to generate debug statements for Network-policy TLV traces.
`port-descr`		Enter to generate debug statements for Port description TLV traces.
`port-id`		Enter to generate debug statements for Port-ID TLV traces.
`port-vlan`		Enter to generate debug statements for Port-VLAN TLV traces.
`ppvlan`		Enter to generate debug statements for Port-protocol-VLAN TLV traces.
`proto-id`		Enter to generate debug statements for Protocol-ID TLV traces.
`pwr-mdi`		Enter to generate debug statements for power-through-MDI TLV traces
`sys-capab`		Enter to generate debug statements for system capabilities TLV traces.
`sys-descr`		Enter to generate debug statements for system description TLV traces.
`sys-name`		Enter to generate debug statements for system name TLV traces.
`ttl`		Enter to generate debug statements for TTL TLV traces.
`vid-digest`		Enter to generate debug statements for VID digest TLV traces.
`vlan-name`		Enter to generate debug statements for VLAN-name TLV traces.

Mode

Privileged EXEC Mode

Prerequisites

This command executes only if LLDP is started

Examples

iS5Comm# debug lldp init-shut

iS5Comm# debug lldp tlv sys-descr