show nvram

To display the current information stored in the NVRAM (nonvolatile random-access memory), use the command show nvram in Privileged EXEC Mode.

show nvram

Mode

Privileged EXEC Mode

Examples

iS5Comm# show nvram

Note:

The CLI pagination behavior is changed to be with global settings rather than session-specific.

Pagination settings are saved as part of the NVRAM settings (see CLI Pagination as shown above) and remains persistent across reboot. After changing the settings, write startup config is not required.

If multiple CLI sessions are opened via Telnet, SSH and Console, change in one session shall reflect in the other session.