To display the LLDP global configuration details to be initialized on an interface, use the command show lldp in Privileged EXEC Mode.
| Parameter | Type | Description |
|---|---|---|
errors |
Enter to display the information about the errors such as memory allocation failures, queue overflows and table overflow | |
interface |
Enter to display the information about interfaces where LLDP is enabled | |
Gigabitethernet |
Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second. | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1. | |
Extreme-Ethernet |
Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-4> without spaces between Slot Number/Port Number. For example, 0/1. | |
local |
Enter to display the current switch information that will be used to populate outbound LLDP advertisements for a specific interface or all interfaces | |
Gigabitethernet |
Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second. | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1. | |
Extreme-Ethernet |
Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-4> without spaces between Slot Number/Port Number. For example, 0/1. | |
mac-addr |
Enter to display information about neighbors for the specified destination MAC address of the LLDP agent. | |
<mac-addr> |
Enter a destination MAC address. | |
mgmt-addr |
Enter to display information about the management addresses configured in the system and Tx enabled ports. | |
neighbors |
Enter to display information about neighbors on an interface or all interfaces. | |
Gigabitethernet |
Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second. | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1. | |
Extreme-Ethernet |
Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-4> without spaces between Slot Number/Port Number. For example, 0/1. | |
chassis-id |
Enter to display LLDP Neighbor information for the specified chassis identifier value. | |
<string(255)> |
Enter a value for the specified chassis identifier value. This value is a string value with a maximum size of 255. | |
detail |
Enter to display the information obtained from all received TLVs. | |
peers |
Enter to display peer related information. | |
Gigabitethernet |
Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second. | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1. | |
Extreme-Ethernet |
Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-4> without spaces between Slot Number/Port Number. For example, 0/1. | |
chassis-id |
Enter to display LLDP Neighbor information for the specified chassis identifier value. | |
<string(255)> |
Enter a value for the specified chassis identifier value. This value is a string value with a maximum size of 255. | |
mac-addr |
Enter to display information about neighbors for the specified destination MAC address of the LLDP agent. | |
<mac-addr> |
Enter a destination MAC address. | |
detail |
Enter to display the information obtained from all received TLVs. | |
statistics |
Enter to display the LLDP remote table statistics information | |
traffic |
Enter to display LLDP counters on all interfaces or on
a specific interface. This includes the following:
|
|
Gigabitethernet |
Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second. | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1. | |
Extreme-Ethernet |
Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links | |
<interface-id> |
Enter to display a specific slot number / port number. The format is <0>/<1-4> without spaces between Slot Number/Port Number. For example, 0/1. | |
mac-addr |
Enter to display information about neighbors for the specified destination MAC address of the LLDP agent. | |
<mac-addr> |
Enter a destination MAC address. |
Privileged EXEC Mode
iS5comm# show lldp
LLDP is enabled
LLDP Version : v1
Transmit Interval : 50
Holdtime Multiplier : 4
Reinitialization Delay : 2
Tx Delay : 2
Notification Interval : 5
Chassis Id SubType : Mac Address
Chassis Id : e8:e8:75:90:0b:01
LLDP Tag Status : disabled
Configured Management Ipv4 Address : 0.0.0.0Configured Management Ipv6 Address : ::
iS5comm# show lldp interface gigabitethernet 0/1
0/1:
Tx State : Enabled
Rx State : Enabled
Tx SEM State : INITIALIZE
Rx SEM State : WAIT PORT OPERATIONAL
Notification Status : Disabled
Notification Type : Mis-configuration
DestinationMacAddr : 01:80:c2:00:00:0e
iS5comm# show lldp local (only gi 0/1 shown below)
Capability Codes :(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device,
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Chassis Id SubType : Mac Address
Chassis Id : e8:e8:75:90:0b:01
System Name : iS5com
System Description : iS5com
iBiome Software version :1.2.17, Raptor L3 Switch
System Capabilities Supported : B,R
System Capabilities Enabled : B,R
-LLDP-MED Info
Device Class : Network Connectivity
LLDP-MED Inventory Info
Hardware Revision : 1531-0001-B02
Firmware Revision : 6.7.2
Software Revision : 6.2.0
Serial Number :
Manufacturer Name : iS5Com
Model Name :
Asset Id : DummyId
LLDP-MED PoE Info
Power Device Type : PSE Device
Power Source : Primary
Gi0/1 :
Port Id SubType : Interface Alias
Port Id : Gi0/1
Port Description : Ethernet Interface Port 01
Enabled Tx Tlvs : Port Description, System Name, System Description, System Capability, Management AddressExtended 802.3 TLV Info
-MAC PHY Configuration & Status
Auto-Neg Support & Status : Not Supported, Enabled
Advertised Capability Bits : 0000
Operational MAU Type : 0
-Link Aggregation
Capability & Status : Not Capable, Not In AggregationAggregated Port Id : 0
-Maximum Frame Size : 1500
Extended 802.1 TLV Info-Port VLAN Id : 1
-Port & Protocol VLAN Id
Protocol VLAN Id Support Protocol VLAN Status TxStatus---------------- ------- -------------------- --------
0 Supported Enabled Disabled
-Vlan NameVlan Id Vlan Name TxStatus------- --------- --------
1 Disabled
LLDP-MED Admin Status : Disabled
-LLDP-MED Capability TLV
LLDP-MED Tx Supported : MedCapability, NetworkPolicy, LocationIdentity,
Ex-PowerViaMDI-PSE, Inventory
LLDP-MED Tx Enabled :
-LLDP-MED Network Policy TLV
Application Type :
Unknown Policy Flag :
VlanType :
VlanID :
Priority :
Dscp :
-LLDP-MED Location TLV Info
Location Subtype :
Location Info :
-LLDP-MED Ex-PowerViaMDI TLV Info
Power Priority : Critical
Power Value : 1000
iS5comm# show lldp local mgmt-addr
Management Address TxEnabledPorts
------------------ --------------
192.168.10.1 Gi0/1, Gi0/2, Gi0/3, Gi0/4
Gi0/5, Gi0/6, Gi0/7, Gi0/8
Gi0/9, Gi0/10, Gi0/11, Gi0/12
Gi0/13, Gi0/14, Gi0/15, Gi0/16
Gi0/17, Gi0/18, Gi0/19, Gi0/20
Gi0/21, Gi0/22, Gi0/23, Gi0/24
iS5comm# show lldp neighbors
Capability Codes :(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device,(W) WLAN Access Point, (P) Repeater, (S) Station, (O) OtherChassis ID Local Intf Hold-time Capability Port Id---------- ---------- --------- ---------- -------
54:e1:ad:07:0d:87 Gi0/10 3601 54:e1:ad:07:0d:87
Total Entries Displayed : 1
iS5comm# show lldp peers gi 0/1
Capability Codes :
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device,
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Chassis ID Local Intf Hold-time Capability Port Id---------- ---------- --------- ---------- -------
Total Entries Displayed : 0
iS5comm# show lldp traffic
Total Frames Out : 19
Total Tagged Frames Out : 0
Total Entries Aged : 0
Total Frames In : 1
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
Total PDU length error Drops : 0
Total LLDP-MED Frames Out : 0
Total LLDP-MED Frames In : 0
Total LLDP-MED Frames Discarded : 0
Total LLDP-MED TLVs Discarded : 1
Total Media Capability TLVs Discarded : 1
Total Network Policy TLVs Discarded : 0
Total Inventory TLVs Discarded : 0
Total Location TLVs Discarded : 0
Total Ex-PowerViaMDI TLVs Discarded : 0
Med-Capability TLV Discard Reason : Not Applicable
Nw-Policy TLV Discard Reason : Not Applicable
Inventory TLV Discard Reason : Not Applicable
Location-ID TLV Discard Reason : Not Applicable
Ex-PowerViaMDI TLV Discard Reason : Not Applicable