show flow-control

To display the flow-control information, use the command show flow-control in Privileged EXEC Mode.

show flow-control

show flow-control { [interface } { {gigabitethernet } { <interface-id>] } { [Extreme-Ethernet } { <interface-id>] } { [port-channel } { <port-channel } { ID (1-65535)>]} }

Parameters

Parameter	Type	Description
`interface`		Enter to display the protocol-specific configuration of the interface.
`Gigabitethernet`		Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second.
`<interface-id>`		Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1.
`Extreme-Ethernet`		Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links
`port-channel`		Enter to display the IP interface configuration for the specified loopback ID
`<port-channelID (1-65535)>`	Integer	Enter a specific port-channel ID. This is a unique value that represents the specific loopback created that ranges from 0 to 65535.

Mode

Privileged EXEC Mode

Examples

iS5Comm# show flow-control Interface gigabitethernet 0/1

Port   Admin    Oper     Tx Pause   Rx Pause   HC TxPause     HC RxPause

Tx   Rx  Tx   Rx

----    -------  -------  --------   --------   ---------- ----------

Gi0/1   off off  on  off  0          0          0              0