This command is used to enable the gratuitous arp feature on an interface.
Parameters
| Parameter | Type | Description |
|---|---|---|
interface-type |
Valid entries are either “Extreme-Ethernet” or “Gigabitethernet”. | |
interface-id |
For the “Gigabitethernet” interface type valid entries
are <0>/<1-28> For the “Extreme-Ethernet” interface type valid entries are <0>/<1-4> |
Mode
Privileged EXEC Mode
Example: Show Gratuitous ARP
iS5Comm# show grat-arp
iS5Comm# show grat-arp gigabitethernet 0/1
Figure 2. Output from show grat-arp gigabitethernet 0/1
