To set the debug level for RIP module, use the command debug ip rip in Privileged EXEC Mode. The no form of the command resets the debug level for RIP module. This command allows combination of debug levels to be configured (that is, more than one level of trace can be enabled or disabled). The debug levels are configured one after the other and not in single execution of the command.
| Parameter | Type | Description |
|---|---|---|
all
|
Enter to generate debug statements for all traces. | |
buffer
|
Enter to generate debug statements for Buffer traces. | |
control
|
Enter to generate debug statements for Control Plane traces. | |
data
|
Enter to generate debug statements for Data path traces. This trace is generated during failure in packet processing. | |
database
|
Enter to generate debug statements for database related traces | |
dump
|
Enter to generate debug statements for Packet Dump traces. | |
events
|
Enter to generate debug statements for Events related traces. | |
failure
|
Enter to generate debug statements for All failure messages including Packet Validation. | |
init
|
Enter to generate debug statements for Initialization and Shutdown traces. This trace is generated on failed initialization of RIP related entries. This is default. | |
mgmt
|
Enter to generate debug statements for Management traces. This trace is generated during failure in configuration of any of the RIP features. | |
os
|
Enter to generate debug statements for OS Resource traces. This trace is generated during failure in message queues. | |
triggers
|
Enter to generate debug statements for Triggers related traces. |
Privileged EXEC Mode
This command executes only if RIP is enabled.