set gvrp

To enable or disable globally the GVRP feature on all ports, use the command set gvrp in Global Configuration Mode. GVRP uses the services of GARP to propagate VLAN registration information to other VLAN-aware bridges in a LAN. This information allows GVRP aware devices to dynamically establish and update the information about the existence of the VLANs in a topology. The GVRP registers the created VLANs with GARP and de-registers the deleted VLANs from the GARP.

set gvrp

set gvrp { {disable } { | enable} }

Parameters

Parameter	Type	Description
`disable`		Enter to disable GVRP feature in the switch on all ports.
`enable`		Enter to enable GVRP feature in the switch on all ports and also starts the GARP in the switch if the GARP is disabled.

Mode

Global Configuration Mode

Default

enable

Prerequisites

GVRP feature can be globally enabled, only if VLAN feature is globally enabled in the switch.
GVRP feature should be globally disabled before globally disabling the VLAN feature in the switch.
GVRP feature cannot be enabled in the switch, if is shutdown in the switch.

Examples

iS5Comm(config)# set gvrp disable