show lacp

To display LACP counter / neighbor information for all port-channels, use the command show lacp in Privileged EXEC Mode.

show lacp { {<port-channel(1-65535)> } { {counters } { | neighbor } { [detail]} } { | counters } { | neighbor } { [detail]} }

Parameters

Parameter	Type	Description
`<port-channel (1-65535)>`	Integer	Enter a value for port-channel to display LACP counter / neighbor information for the specified port-channel. This is a unique value that represents the specific port-channel created. This value ranges from 1 to 65535.
`counters`		Enter to display the LACP counter information. The information contains port ID, LACP PDUs sent and received, number of markers sent and received, number of marker response sent and received, number of LACP PDUs packets and number of LACP PDUs errors.
`neighbor`		Enter to display LACP neighbor information. This information contains partner system ID, flags details, LACP partner port priority, operational key, and port state
`detail`		Enter to display the detailed LACP neighbor information. This information contain partner system ID, flags, aggregation state, and LACP partner port priority, partner oper key, partner port state, activity and timeout.

Privileged EXEC Mode

This command executes successfully only if,

iS5Comm# show lacp 1 counters

LACPDUs           Marker     Response    LACPDUs        Error States

Port   Sent  Recv      Sent  Recv      Sent   Recv      Pkts Err       Detd Trgd

-----------------------------------------------------------------------------------

Channel group: 1

------------------

No interfaces aggregated in the channel group