show interfaces etherchannel

To display the EtherChannel details for all aggregated ports and port channels, use the command show interfaces etherchannel in Privileged EXEC Mode. The port details contain port state, group to which the port belongs, port mode, aggregation state, port-channel ID, pseudo port-channel ID, admin key, oper key, port number, port state, and LACP port-priority, wait-time, port identifier, activity and timeout. The port channel details contain port channel ID, number of member ports, ID of hot standby port, port state, status of protocol operate mode, aggregator MAC, and default port ID.

show interfaces etherchannel

show interfaces { {Extreme-Ethernet } { <interface-id> } { | Gigabitethernet } { <interface-id>} } { etherchannel }

Parameters

Parameter	Type	Description
`Gigabitethernet`		Enter to display gigabitetethernet type of interface. Gigabitethernet is a version of LAN standard architecture that supports data transfer up to 1 Gigabit per second.
`<interface-id>`		Enter to display a specific slot number / port number. The format is <0>/<1-28> without spaces between Slot Number/Port Number. For example, 0/1.
`Extreme-Ethernet`		Enter to display the Extreme-Ethernet type of interface. Extreme Ethernet is a version of Ethernet that supports data transfer up to 10 Gigabits per second and only full duplex links
`<interface-id>`		Enter to display a specific slot number / port number. The format is <0>/<1-4> without spaces between Slot Number/Port Number. For example, 0/1.
`etherchannel`		Enter to display the EtherChannel details for a specific interface.

Mode

Privileged EXEC Mode

Prerequisites

This command executes successfully only if,

LA functionality is started in the switch.

Examples

iS5Comm# show interfaces gigabitethernet 0/1 etherchannel

Port : Gi0/1

-------------

Port State = Up, Independent

Channel Group :  1

Mode : Active

Port-channel = Null

Pseudo port-channel = Po1

LACP port-priority  = 1

LACP Wait-time  = 1 secs

LACP Admin Port = 2

LACP Activity : Active

LACP Timeout : Short

Aggregation State : Aggregation, Sync, Defaulted Expired

                 LACP Port   Admin  Oper   Port

  Port     State   Priority    Key       Number  State

--------------------------------------------------------

Gi0/1    Indep   1           1      1      0x1     0xf3

iS5Comm# show interfaces etherchannel

Port : Gi0/2

-------------

Port State = Up, Independent

Channel Group : 1

Mode : Active

Port-channel = Null

Pseudo port-channel = Po1

LACP port-priority  = 128

LACP Wait-time  = 2 secs

LACP Port Identifier = 2

LACP Activity : Active

LACP Timeout : Long

Aggregation State : Aggregation, Sync, Defaulted Expired

 LACP Port   Admin  Oper   Port

  Port     State   Priority    Key       Number  State

-----------------------------------------------------------

Gi0/2    Indep   128         1      1      0x2     0xb3

Port-channel : Po1

-------------------

Number of Ports = 1

HotStandBy port = null

Port state = Port-channel Ag-Not-Inuse

Protocol = LACP

Aggregator-MAC  00:04:02:03:04:41

Maximum number of Ports  = 5

Port-Channel Mtu         = 1500

Port-Channel Speed       = 0 Mbps

Port-Channel High Speed  = 0 Mbps

Port-Channel Member Ports Speed = 100 Mbps

Port-Channel Member Ports High Speed  = 100 Mbps