lacp timeout

To configure the LACP timeout period within which LACP PDUs should be received on a port and avoid timing out of the aggregated link, use the command lacp timeout in Interface Configuration Mode. The no form of the command resets the LACP timeout period to its default value.

lacp timeout

lacp timeout { {long } { | short} }

no lacp timeout

Parameters

Parameter	Type	Description
`long`		Enter to configure the LLACP timeout period as 90 seconds. The LACP PDU should be received every 30 seconds. This is the default.
`short`		Enter to configure the LLACP timeout period as 3 seconds. The LACP PDU should be received every second.

Mode

Interface Configuration Mode

Prerequisites

This command executes successfully, only if

the LA functionality is started and enabled in the switch.
This configuration takes effect only on the interface that is configured for LACP.

Examples

iS5Comm(config)# interface gi 0/9

iS5Comm(config-if)# lacp timeout short