lacp system-priority

To configure the LACP priority, use the command lacp system-priority in Global Configuration Mode. The no form of the command resets the LACP priority to its default value.

lacp system-priority

lacp system-priority { <priority (0-65535)> }

no lacp system-priority

Parameters

Parameter	Type	Description
`<priority (0-65535)>`	Integer	Enter to configure the LACP priority associated with actor’s system ID. This priority value ranges between 0 and 65535. The switch with the lowest LACP decides the standby and active links in the LA. The default is 32768.

Mode

Global Configuration Mode

Prerequisites

This command executes successfully, only if

the LA functionality is started and enabled in the switch.
when D-LAG status is disabled

Examples

iS5Comm(config)# set port-channel enable