To disable a physical interface / VLAN interface / port-channel
interface / tunnel interface / OOB interface, use the command
shutdown in
Interface Configuration Mode. The no form of the command enables
a physical interface / VLAN interface / port-channel interface /
tunnel interface / OOB interface.
Mode
Interface Configuration Mode for
physical interface / port-channel/tunnel interface/OOB Interface
/ VLAN Interface Mode for VLAN interface
Prerequisites
- All functions on the
specified interface are disabled by the shutdown command
- if OOB interface is enabled, then the Physical Interface eth0
is disabled.
- When the same network interface is used for OOB and NFS mounting,
the operation done on OOB will have impact on NFS. For example,
when interface eth0 is used for OOB and NFS mounting, executing
shutdown command on the OOB interface will make the admin down and
the NFS communication will be lost.
Default
- The Physical Interface
eth0 is enabled
- The interface VLAN 1 is enabled
- The Port-channel interface is disabled
Examples
iS5Comm# (config-if)# shutdown