show etherchannel

To display the EtherChannel information port-channels created in the switch, use the command show etherchannel in Privileged EXEC Mode. This information contains “admin” and “oper” status of port-channel module and status of protocol operate Mode for each group.

show etherchannel

show etherchannel { [<channel-group-number(1-65535)>] } { [detail] } { [load-balance] } { [port] } { [port-channel] } { [protocol] } { [summary] }

Parameters

Parameter Type Description
<channel-group-number(1-65535)> Integer Enter a value identifying a port-channel group to display EtherChannel information for the specified port-channel group. This is a unique value that represents the specific port-channel created. This value ranges from 1 to 65535.
detail   Enter to display detailed EtherChannel information. The information contain admin and oper status of port channel module, LACP system priority, status of protocol operate Mode for each group, port details for each group and port channel details. The port details contain port state, group to which the port belongs, port mode, aggregation state, port-channel ID, pseudo port-channel ID, admin key, oper key, port number, port state, and LACP port-priority, wait-time, port identifier, activity and timeout. The port channel details contain port channel ID, number of member ports, ID of hot standby port, port state, status of protocol operate Mode, aggregator MAC and default port ID.
load-balance   Enter to display the load balancing policy applied for each port-channel groups.
port   Enter to display the status of protocol operate mode and port details for each group. The port details contain port state, group to which the port belongs, port Mode, aggregation state, port-channel ID, pseudo port-channel ID, admin key, oper key, port number, port state, and LACP port-priority, wait-time, port identifier, activity and timeout.
port-channel   Enter to display the admin and oper status of port channel module, and port channel details. The port channel details contain port channel ID, number of member ports, ID of hot standby port, port state, status of protocol operate Mode, aggregator MAC and default port ID.
protocol   Enter to display the status of protocol operate mode for each port-channel group.
summary   Enter to display the admin and oper status of port channel module, number of channel groups used, number of aggregators, group IDs, and port channel ID, status of protocol operate Mode and member ports for each group

Mode

Privileged EXEC Mode

Prerequisites

This command executes successfully only if,
  • LA functionality is started in the switch.
  • Port channel is created in the system

Examples

iS5Comm# show etherchannel

Port-channel Module Admin Status is enabled
Port-channel Module Oper Status is enabled
Port-channel recovery action on exceeding Threshold is None
Port-channel Independent mode is disabled
Port-channel System Identifier is  00:01:02:03:04:05
LACP System Priority: 5
LACP Error Recovery Time: 0
LACP Error Recovery Threshold: 5
LACP Recovery Triggered count: 0
LACP Error Recovery Threshold for Defaulted State : 5
LACP Error Recovery Threshold for Hardware Failure : 5
LACP Same state threshold : 5

Channel Group Listing
---------------------
Group : 1
----------
Group Status : L2
Protocol : Disabled
Group : 2
----------
Group Status : L2
Protocol : Disabled

iS5Comm# show etherchannel detail

Port-channel Module Admin Status is enabled
Port-channel Module Oper Status is enabled
Port-channel Independent mode is disabled
Port-channel System Identifier is  00:01:02:03:04:05
LACP System Priority: 5
                 Channel Group Listing                 ---------------------
Group: 1
----------
Protocol :LACP                 
Ports in the Group
                 
------------------
Port : Gi0/2
-------------
Port State = Up in Bundle
Channel Group : 1
Mode : Active
Port-channel = Po1
Pseudo port-channel = Po1
LACP port-priority  = 128
LACP Wait-time  = 2 secs
LACP Port Identifier = 2
LACP Activity : ActiveLACP Timeout : LongAggregation 
State : Aggregation, Sync, Collecting, Distributing, Defaulted                 
LACP Port   Admin  Oper   Port   Port     State   Priority    Key       Number  State
---------------------------------------------------------------------
Gi0/2    Bundle  128         1      1      0x2     0xbe
Port-channel : Po1
-------------------
Number of Ports = 1
HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = LACP
Aggregator-MAC  00:03:02:03:04:41
Maximum number of Ports  = 5
Port-Channel Mtu         = 1500
Port-Channel Speed       = 100 Mbps
Port-Channel High Speed  = 0 Mbps
Port-Channel Member Ports 
Speed = 100 MbpsPort-Channel 
Member Ports High Speed  = 100 Mbps

iS5Comm# show etherchannel load-balance

 Channel Group Listing                
 ---------------------
Group : 1
----------
Source and Destination Mac VID

iS5Comm# show etherchannel port

 Channel Group Listing                 
---------------------
Group: 1----------
Protocol :LACP
                 Ports in the Group                 ------------------
Port : Gi0/2
-------------
Port State = Up in Bundle
Channel Group : 1
Mode : Active
Port-channel = Po1
Pseudo port-channel = Po1
LACP port-priority  = 128
LACP Wait-time  = 2 secs
LACP Port Identifier = 2
LACP Activity : Active
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing, Defaulted
                 
LACP Port   Admin  Oper   Port    
PortPort     State   Priority    Key    Key    Number  State
---------------------------------------------------------------------
Gi0/2    Bundle  128         1      1      0x2     0xbe


iS5Comm
# show etherchannel port-channel


Port-channel Module Admin Status is enabled


Port-channel Module Oper Status is enabled


Port-channel Independent mode is enabled


Port-channel System Identifier is  00:01:02:03:04:05


LACP System Priority: 5


                 Channel Group Listing                 ---------------------Group : 1


----------e : L2


                Port-channels in the group:                ---------------------------


Port-channel : Po1


------------------


Number of Ports = 1


HotStandBy port = null


Port state = Port-channel Ag-Not-Inuse


Protocol = LACP


Aggregator-MAC  00:04:02:03:04:41


Maximum number of Ports  = 5


Port-Channel Mtu         = 1500


Port-Channel Speed       = 0 Mbps


Port-Channel High Speed  = 0 Mbps


Port-Channel Member Ports Speed = 100 Mbps


Port-Channel Member Ports High Speed = 100 Mbps 


iS5Comm
# show etherchannel protocol


 Channel Group Listing


                 ---------------------


Group : 1


----------


Group Status : L2


Protocol : LACP


iS5Comm#
show etherchannel summary


Port-channel Module Admin Status is enabled


Port-channel Module Oper Status is enabled


Port-channel recovery action on exceeding Threshold is None


Port-channel Independent mode is disabled


Port-channel System Identifier is  e8:e8:75:90:0b:01


LACP System Priority: 32768


LACP Error Recovery Time: 0


LACP Error Recovery Threshold: 5


LACP Recovery Triggered count: 0


LACP Error Recovery Threshold for Defaulted State : 5


LACP Error Recovery Threshold for Hardware Failure : 5


LACP Same state threshold : 5










Parent topic: LA