set ip nat

To enable or disable NAT feature, or define NAT entries number, use the set ip nat command in Global Configuration Mode.

set ip nat { {enable | } { disable | } { entries_typical_num } { <short (0-5000)>} }

Parameters

Parameter	Type	Description
`enable`		Enter to enable NAT.
`disable`		Enter to disable NAT.
`entries_typical_num`		Enter to define NAT debug level.
`<short (0-5000)>`		Configures NAT debug to trace level

Global Configuration Mode

iS5Comm (config)# set ip nat enable

iS5Comm (config)# set ip nat disable

iS5Comm (config)# set ip nat entries_typical_num 100

iS5Comm (config)# set nat entries_typical_num 300