set linkup-delay

To enable / disable the Linkup-delay of the interface, use the command set linkup-delay in Global Configuration Mode.

set linkup-delay { {enable } { | disable} }

Parameters

Parameter	Type	Description
`enable`		Enter to enable linkup delay in the system by suspending operational status of the link for a configured delay time
`disable`		Enter to disable linkup delay in the system by not delaying and indicating the operational status of the link to the higher layers immediately.

Global Configuration Mode

Linkup-delay configurations are supported only on physical interfaces.
Linkup-delay configurations are not supported for the logical interfaces like port-channel, router ports.

iS5Comm (config)# set linkup-delay enable