To enable or disable the setting of P bit in the default Type-7 LSA generated by NSSA internal ASBR, use the command set nssa asbr-default-route in OSPF Router Configuration Mode.
| Parameter | Type | Description |
|---|---|---|
sbr-default-route
|
Enter to configure the setting of P bit in the default Type-7 LSA generated by NSSA internal ASBR. | |
translator
|
Enter to configure P-Bit related configuration. | |
disable
|
Enter to clear P-Bit in the generated default LAS, when NSSA ASBR is set to disabled. | |
enable
|
Enter to set P-Bit in the generated Type-7 default LSA, when NSSA ASBR is set to enabled. |
OSPF Router Configuration Mode
disable
iS5Comm(config)# router ospf
iS5Comm(config-router)# set nssa asbr-default-route translator enable