Configuring VLAN Learning Mode

By default, the VLAN learning mode is IVL (Independent VLAN Learning).

1. Execute the following commands to change the default learning mode to hybrid.
   perform the following:

   iSCom# configure terminal

   • Configure the VLAN Learning Mode as Hybrid.

   iSCom(config)# vlan learning mode hybrid

   • Exit from the Configuration Mode.

   iSCom(config)# end

2. Review the configuration.
   perform the following:

   iSCom# show vlan device info

   Vlan device configurations

   --------------------------

   Vlan Status                       : Enabled

   Vlan Oper status                  : Enabled

   Gvrp status                       : Disabled

   Gmrp status                       : Disabled

   Gvrp Oper status                  : Disabled

   Gmrp Oper status                  : Disabled

   Mac-Vlan Status                   : Disabled

   Subnet-Vlan Status                : Disabled

   Protocol-Vlan Status              : Enabled

   Base-Bridge Mode                  : Vlan Aware Bridge

   Traffic Classes                   : Enabled

   Vlan Operational Learning Mode    : Hybrid

   Hybrid Default Learning Mode      : IVL

   Version number                    : 1

   Max Vlan id                       : 4094

   Max supported vlans               : 4094

   Global mac learning status        : Enabled

   Filtering Utility Criteria        : Enabled