Enabling LLDP-MED Capability TLV

CLI Configuration

View the local system information by executing the following command

Type the following:

iS5comm# show lldp local gigabitethernet  0/1

Port Id SubType               : Interface Alias

Port Id                       : Gi0/1

Port Description              : Ethernet Interface Port 01

Enabled Tx Tlvs               : Port Description, System Name,

System Description, System Capability,

Management Address

Extended 802.3 TLV Info

-MAC PHY Configuration & Status

Auto-Neg Support & Status     :  ,

Advertised Capability Bits    : 0000

Operational MAU Type          : 0

-Maximum Frame Size           : 1500

Extended 802.1 TLV Info

-Port VLAN Id                 : 1

-Port & Protocol VLAN Id

Protocol VLAN Id     Support    Protocol VLAN Status     TxStatus

----------------     -------    --------------------     --------

0                    Supported  Enabled                  Disabled

-Vlan Name

Vlan Id        Vlan Name                          TxStatus

-------        ---------                          --------

1                                                 Disabled

-Link Aggregation

Capability & Status           : Not Capable, Not In Aggregation

Aggregated Port Id            : 0

-VID TLV:

VID            TxStatus

-------        ---------

1dcdf777       Enabled

-Management Vid TLV:

Vlan Id        TxStatus

-------        ---------

1              Enabled

LLDP-MED Admin Status         : Disabled

-LLDP-MED Capability TLV

LLDP-MED Tx Supported         : MedCapability, NetworkPolicy,

LocationIdentity,

Ex-PowerViaMDI-PSE, Inventory

LLDP-MED Tx Enabled :MedCapability

-LLDP-MED Network Policy TLV

Application Type              :

Unknown Policy Flag           :

VlanType                      :

VlanID                        :

Priority                      :

Dscp                          :

-LLDP-MED Location TLV Info

Location Subtype              :

Location Info                 :

-LLDP-MED Ex-PowerViaMDI TLV Info

Power Priority                : Critical

Power Value                   : 1000

------------------------------------------------------------

View the information about neighbors learnt on a particular interface by executing the following command;

Type the following

iS5comm# show lldp neighbors detail

Capability Codes:

(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device,

(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other

Chassis Id SubType            : Mac Address

Chassis Id                    : e8:e8:75:90:0b:01

Port Id SubType               : Interface Alias

Port Id                       : Gi0/1

Port Description              : Not Advertised

System Name                   : Not Advertised

System Desc                   : Not Advertised

Local Intf                    : Gi0/1

Time Remaining                : 104 Seconds

System Capabilities Tlv       : Not Advertised

Management Address            : Not Advertised

Extended 802.3 TLV Info

-MAC PHY Configuration & Status

Auto Negotiation Tlv          : Not Advertised

-Link Aggregation

Link Aggregation Tlv          : Not Advertised

-Maximum Frame Size Tlv       : Not Advertised

Extended 802.1 TLV Info

-Port VLAN Tlv                : Not Advertised

-Port & Protocol VLAN Id

Protocol Vlan Tlv             : Not Advertised

-Vlan Name

Vlan Name Tlv                 : Not Advertised

-VID TLV:0

-Management Vid TLV   :0

-LLDP MED Capability TLV

Capabilities Supported        : MedCapability, NetworkPolicy, Inventory

Capabilities Enabled          : MedCapability

Device Class                  : Endpoint Class III

-LLDP MED Inventory TLV       : Not Advertised

Hardware Revision             : 0

Firmware Revision             : 0

Software Revision             : 0

Serial Number                 : 0